UV82 series Programming Memories Manually
The following steps must be followed exactly.
Do NOT skip any steps along the way.
Frequency Mode vs. Channel Mode
These two modes have different functions and often confused.
Frequency Mode - Used for a temporary frequency assignment, such as a test frequency or quick field programming.
Channel Mode - Used for selecting preprogrammed channels.
All programming MUST be initially done in the Frequency Mode using the Upper Display only. From there you have the option of assigning the entered data to a specific channel for later access in the Channel Mode if desired.
IMPORTANT: Programming done using the Lower display cannot be saved and will be lost.
No comments:
Post a Comment
Thanks for your comments, Comments may take a day to show up
Used for discussions, it is a collaboration group
Digital Ham Radio / Amateur Radio
DigitalHamRADIO@groups.io
https://groups.io/g/DigitalHamRADIO
Amateur Radio Users Support Group
AmateurRadio@groups.io
https://groups.io/g/AmateurRadio
North America Amateur Frequencies
A shared discussion about North America Frequencies.
https://groups.io/g/Frequency
.
Note: only a member of this blog may post a comment.