This example is for: 146.700 MHz
600kHz minus offset
into channel 99
CTCSS tone 123.0
1. Set radio to VFO Mode (Frequency Mode)
a.) UV5R series - Press VFO/MR button
b.) UV82 - Turn radio OFF, then Press/Hold MENU button during PowerON.
2. Select Display A (this is a must)
a.) UV5R/GT3 - Press [A/B] and select the Upper Display.
b.) UV82 - Press [EXIT A/B] and select the Upper Display.
3. Disable TDR (Dual Watch/Dual RX) which toggles between A and B.
Press [Menu] 7 [Menu]
Select OFF
Press [Menu] [Exit]
4. Delete Prior Data from the channel to be programmed.
Press [Menu] 2 8 [Menu]
Enter 9 9 (Memory Channel to clear)
Press [Menu] [Exit]
5. Enter the Repeater Offset.
Note: Requires five digits. 5MHz = 0 5 0 0 0
Press [Menu] 2 6 [Menu]
Enter 0 0 6 0 0
Press [Menu] [Exit]
6. Enter the Transmit Frequency Shift.
Press [Menu] 2 5 [Menu]
Enter 2 for Minus shift. ( or
to - )Press [Menu] [Exit]
7. Set CTCSS or DCS codes for Transmit.
( example = CTCSS TX tone 123.0 Hz )
Press [Menu] 1 3 [Menu]
Enter 1 2 3 0 [Menu] [Exit]
8. Enter the repeater output frequency, 1 4 6 . 7 0 0
